IBM 07N6286 hard drive specifications

IBM Ultrastar 73LZX - hard drive - 36.7 GB - Ultra160 SCSI

IBM Ultrastar 73LZX drives offer proven quality and high performance. These drives feature more powerful processors and read/write channels, a feed-forward servo control that improves seek and settle time, and better suspension dynamics that enable greater servo bandwidth, faster speeds, and improved mechanical stability. To achieve maximum I/O performance, the drives combine fast seek times, large 4 MB multi-segmented buffers, a sophisticated command queuing system, hardware automation, and industry-leading internal data rates. They also employ fifth-generation giant magnetoresistive (GMR) head technology to double areal density and performance. In addition, highly efficient No-ID sector formatting enables more data to be stored per disk. To help ensure data protection, IBM Ultrastar drives include IBM-exclusive reporting tools, such as Predictive Failure Analysis (to signal potential drive problems) and Drive-TIP (to monitor drives and avoid malfunctions). Load/unload technology and glass substrate disks also increase reliability by providing a more robust solution at high rotational speeds. IBM Ultrastar drives provide extremely quiet operation. In addition, tri-laminate drive covers reduce both idle and seek acoustics while an improved spindle motor driver enables smoother commutation.

Recommended software for IBM 07N6286 status and S.M.A.R.T. monitoring is ActiveSMART www.ariolic.com


Manufacturer
IBM

HDD Part Number
07N6286


Hard drive health monitoring software
ActiveSMART by Ariolic Software. Click to download ActiveSMART

General

Device Type
Hard drive - Hot-swap hard drive

Width
4 in

Depth
5.7 in

Height
1 in

Weight
1.8 lbs

Hard Drive

Form Factor

Capacity
36.7 GB

Interface Type
Ultra160 SCSI

Connector
80 pin Centronics (SCA-2)

Buffer Size
4 MB

Features
No-ID, Glass disk, Load/unload technology, Predictive Failure Analysis (PFA), Giant magnetoresistive (GMR) head technology

Compliant Standards
S.M.A.R.T.

Performance

Drive Transfer Rate
160 MBps

Internal Data Rate
86.3 MBps

Seek Time
4.9 ms (average) / 10.5 ms (max)

Track-to-Track Seek Time
0.5 ms

Average Latency
3 ms

Spindle Speed
10000 rpm

Reliability

Storage Hard Drive / Non-Recoverable Errors
1 per 10^14

Start / Stop Cycles
50,000

Storage Controller

Type
None

Expansion / Connectivity

Interfaces
1 x Ultra160 SCSI - 80 pin Centronics (SCA-2)

Compatible Bays
1 x Hot-swap - 3.5" x 1/3H

Compatible Slots
x None

Power

Power Device
None

Environmental Parameters

Min Operating Temperature
41 �F

Max Operating Temperature
131 �F

Humidity Range Operating
8 - 90%

Shock Tolerance
10 g @ 11ms half-sine pulse (operating) / 75 g @ 11ms half-sine pulse (non-operating)

Vibration Tolerance
0.56 g @ RMS (random) (operating) / 1.04 g @ RMS (random) (non-operating)


0.0930